Handball-Equipment



Handball goal corner screwed goal depth 0.75m
€648.55
(tax incl.)
Handball goal with screwed goal frame <br> According to DIN EN 749 <br> <br> Handball goal dimensions: <br> <UL> <LI> width: 3.00m <LI> height: 2.00m <LI> gate depth: 0.75m </UL>
Handballtor 3 x 2 m
€679.00
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
Competition handball goal BENZ Blackline - certified IHF
€963.00
(tax incl.)
Competition handball goal BENZ Blackline - certified IHF Complettely welded aluminium frame The ultimate goal for performance-oriented handball sport Special aluminum profile including additional reinforcement Incl. Frame corner reinforcements (inlays) 6-point fixing on the sports-floor (Fixing by using floor-plates (art.-no. 41211) + screws (art.-no. 41214) According to DIN EN 749 IHF certified Handball goal dimensions: width: 3.00m height: 2.00m gate depth: 1.25m
Handballtor 3 x 2 m
€625.00
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
Handballtor 3 x 2 m
€760.01
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
Handball goal net type A + B 3.5mm white-black
€179.50
(tax incl.)
Handball goal net type A / B 3.5mm white-black <br> Knotless polypropylene <br> Camera-optimized optics <br> Mesh size 100mm <br> Including net tensioning lines <br> According to DIN EN 749 <br> Packing unit 1 pair <br> <br> Handball goal net dimensions: <br> <UL> <LI> width: 3.00m <LI> height: 2.00m <LI> gate depth (top): 0.80m <LI> gate depth (bottom): 1.00m </UL>
Chain weights
€77.70
(tax incl.)
Handball goal nets with bilateral tether. Chain, 800 g / m, is located in a plastic tube, which is woven by the lower meshes of the net.
Small field goal eckverschraubt in pods
€635.00
(tax incl.)
Network frame folded 3 x 2 m, m goal depth 1.25. Posts and crossbar made of special aluminum profile 8 x 8 cm, eckverschraubt in ground sleeves standing. Surface anodized, black remote fields. Hinged, galvanized steel mesh strap. Complete with pipe end caps and plastic net hooks. The net is suspended freely between the net supports. Delivery without power and ground sleeves.
Handball (outdoor), very stable
€670.01
(tax incl.)
3 x 2 m, cm goal depth 125th Posts and crossbar made of special aluminum profile 8 x 8 cm. Surface anodized, black remote fields. Steel mesh strap galvanized - not hinged, but dismantled. Galvanized pipe connecting cross with four mounting tabs for door anchorage on the ground (DIN EN 749). Ideal gateway for courts as very robust. Complete with pipe end caps and plastic net hooks. The net is suspended freely between the net supports. No power.
handball taped corner
€729.01
(tax incl.)
3 x 2 m, cm goal depth 125th Ecken.Pfosten with welded bar and made of special aluminum profile 8 x 8 cm. Surface anodized, black remote fields. galvanized steel mesh strap? not hinged, but dismantled. Galvanized pipe connecting cross with four mounting tabs for door anchorage on the ground (DIN EN 749). Ideal gateway for courts as very robust. Complete with pipe end caps and plastic net hooks. The net is suspended freely between the net supports. No power.
Handball goal net
€151.90
(tax incl.)
Polyethylene, turned, 4mm, green, for electrically hoistable handball. Mesh width 100 mm, green. Netzausladung above 80 cm below 100 cm. Featuring a long lead tape 5 m to weigh down the lower edge network.
Handballtor 3 x 2 m
€640.01
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
Handballtor 3 x 2 m
€775.00
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
Handball goal corner screwed goal depth 0.50m
€574.89
(tax incl.)
Handball goal with screwed goal frame <br> According to DIN EN 749 <br> <br> Handball goal dimensions: <br> <UL> <LI> width: 3.00m <LI> height: 2.00m <LI> gate depth: 0.50m </UL>
Safety screw (DBGM)
€12.50
(tax incl.)
To door anchorage on the floor, or ground anchor for fastening starting blocks, 30 mm thread length.
Tensioning rope fittings
€22.50
(tax incl.)
Polyethylene, 6 mm thick. For Handball gates, where the networks are freely suspended within the bracket. Set consisting of 4 cables - both upper tension lines with quick-locking. Not illustrated.
Beach Handball -Spielfeldmarkierung
€218.90
(tax incl.)
27 x 12 m, professional version includes: 2 bands side lines A 27 m, 2 bands goallines á 12m, 2 bands crease lines mm á 12m reinforced PP webbing 50, 8 glass fiber reinforced plastic corner elements DBGM, 8 sand anchor plates with bungee tensioning line. Red color.
Handballtor 3 x 2 m
€696.00
(tax incl.)
Reinforcement bracket gives the door frame an enormous stability. All screw connections are equipped with self-fuses. The net supports are made of thick steel pipe, hence the gate receives a unique status. The net is suspended freely between the net supports. Each net support is provided with the proven mounting tabs? now taken over in this design in the DIN. Complete with pipe end caps and plastic net hooks for easy installation. For halls. Varnished and foldable net supports, four bottom flaps. According to DIN EN 749, IHF-certified. No power.
A knotless nets for small field and handball goals type A / B (pair)
€108.69
(tax incl.)
Polypropylene, 4 mm, green, exclusively with lower clamping leash and leash in Torrahmenbereich - this long life. According to EN 749. Handball goal nets in accordance with DIN EN 749 are generally suspended inside the gate between the net supports. This can not bounce off the Torkonstruktionsteilen, which reduces the risk of injury of goalkeeper an apt one move ball.
mounting frame
€317.10
(tax incl.)
For digging in the sand. The frame a ground sleeve to set a Beach Handball gate and two sand anchor plates welded from sheet steel. Goals are stable and easy to assemble: first In Frame size sand ausbuddeln2. Frame legen3. Setting the gate and ausrichten4. zufüllen frame with sand
Beach handball, silver anodized
€437.00
(tax incl.)
3 x 2 m, posts and crossbar made of special aluminum profile, 8 x 8 cm, in ground sockets standing. Surface silver anodized. Galvanized, firmly bolted to the goal post net hoop. Complete with pipe end caps and plastic net hooks. and without power. Ground sockets.
GOALCHA Street Handball
Stück price_from 24.5 €
(tax incl.)
Handgenähter Methodikball aus strapazierfähigem HPU 1000 Material. In- und Outdoor einsetzbar. Sehr weich und leicht einzudrücken,da mit synthetischer Wolle gefüllt. Daher kann der Ball auch nicht gedribbelt werden. Leicht zu fangen und zu kontrollieren. Besonders für Einsteiger geeignet. In 2 Größen erhältlich. Farbe grün.